Bandicam recording corrupted? How to fix a broken MP4 or AVI capture

By the FixMP4 engineering team · · 7 min read

A Bandicam recording that will not play almost always means the capture was not closed properly. Bandicam is often used for long game sessions, lectures and tutorials, so a crash, a blue screen, a power cut or closing the program from Task Manager can cut off hours of footage. Bandicam has its own recovery tool, and when that is not enough, the recording can usually be rebuilt. This guide covers both, in the right order.

Why Bandicam MP4 files break

An MP4 holds compressed video and audio frames plus an index describing where each frame lives. Bandicam writes frames continuously, and the final MP4 index is completed when you stop recording. If recording ends any other way, the file on disk is large but has no valid index:

  • The game, the PC or Windows crashed.
  • Power was lost, or a laptop battery ran out.
  • Bandicam was closed through Task Manager or by a forced shutdown.
  • The target drive filled up during recording.
  • You opened the file while it was still recording, which Bandicam's support specifically warns can cause errors.

AVI files from Bandicam break in a similar way, though AVI stores its index differently and is easier for players to work around.

Step 1: look for the .bfix file

Open your Bandicam output folder (by default under Documents\Bandicam, or wherever you set it in the General tab). Next to an interrupted MP4 there is often a file with the same name and a .bfix extension.

According to Bandicam's documentation, this file contains the index information of the MP4 being recorded. It is created when recording starts and deleted automatically when recording ends normally. If it is still there, Bandicam did not finish, and the file holds the information needed for recovery.

Double-click the .bfix file. BandiFix opens and repairs the matching MP4 automatically. Keep a copy of both files before you do this.

Step 2: run BandiFix manually

If there is no .bfix file, or double-clicking did not help:

  1. Go to the Bandicam installation folder, usually C:\Program Files\Bandicam.
  2. Run bdfix.exe.
  3. Click Open and choose the broken recording.
  4. Wait for BandiFix to finish and test the result.

Bandicam lists some limitations: BandiFix repairs Bandicam AVI and MP4 recordings (it also handles other AVI files, but not MP4 files from other sources such as downloads); it may fail if the "write caching" option was enabled in Bandicam's advanced settings; and certain Bandicam versions had known MP4 repair problems that later updates fixed. Updating Bandicam before running BandiFix is a good idea.

Step 3: if BandiFix cannot repair it

When BandiFix gives up, the frames are usually still in the file. What is missing is the codec information and the index. A general MP4 index rebuild can recover it using a short reference recording.

Make a reference recording

Open Bandicam with exactly the same settings used for the broken recording:

  • Format: MP4.
  • Video codec: H.264 (CPU), H.264 (NVIDIA NVENC), H.264 (Intel Quick Sync), H.264 (AMD VCE) or HEVC.
  • Resolution, frame rate and quality or bitrate.
  • Audio codec (AAC) and channels.
  • The same recording mode (screen area, game, or device).

Record 10 to 20 seconds of anything and stop it normally with the hotkey or the stop button. That clip has a full, valid index with the right codec settings. Our article on choosing a reference file explains why matching settings is important.

Rebuild the recording

  1. Copy the broken MP4 and the reference clip to a folder with enough free space.
  2. Open the FixMP4 repair tool in your browser and add both files.
  3. FixMP4 reads the files locally, without uploading them, copies codec parameters from the reference, scans the broken recording for H.264 or HEVC frames and AAC audio, and writes a new index.
  4. Watch the free preview. If the gameplay or lesson is there, export the repaired MP4.

Large Bandicam captures, several gigabytes or more, work fine because processing happens on your own machine.

What about AVI recordings?

For AVI files, BandiFix is the right first tool. If you do not have Bandicam installed, VLC can also play many broken AVI files: in Tools, Preferences, Input / Codecs, set "Damaged or incomplete AVI file" to "Always fix". FixMP4 repairs MP4, MOV and M4A only, not AVI. If you need an MP4, convert the AVI after it plays.

Common follow-up problems

  • Audio out of sync after repair: long captures with variable frame rate can drift. Our guide on video audio out of sync covers fixes, and switching Bandicam to constant frame rate (CFR) prevents it.
  • Black screen with sound: the video frames did not decode, often because the reference was recorded with a different encoder (NVENC vs CPU). Record a new reference with the same encoder. See also MP4 plays sound but black screen.
  • Recording ends earlier than expected: data written after the drive filled up was never saved. Only what reached the disk can be recovered.

Preventing broken Bandicam recordings

  • Stop recording with the hotkey before closing the game or shutting down.
  • Keep graphics drivers and Bandicam up to date; Bandicam notes that hardware encoder driver problems are a common cause of frequent corruption.
  • If corruption keeps happening, Bandicam suggests recording to AVI with the H.264 (CPU) codec, which survives interruptions better.
  • Use constant frame rate for recordings you plan to edit.
  • Record to an internal drive with plenty of free space, not a USB stick.
  • For long sessions, use Bandicam's Auto Complete Recording option to end and start a new file by time or size, so a crash only affects the last part.

Bandicam compared with other recorders

OBS can record to MKV or fragmented MP4, which survive crashes far better; see our guides to recovering an OBS recording and fragmented MP4. For the built-in Windows recorder, see Xbox Game Bar recordings.

Summary

Use the .bfix file first, BandiFix second, and a reference-based rebuild in the repair tool third. Check the free preview before exporting, and switch to safer settings to avoid the next crash.

Frequently asked questions

What is the .bfix file next to my Bandicam recording?

Bandicam writes a .bfix index file while it records an MP4 and deletes it when recording stops normally. If Bandicam crashes or the PC loses power, the .bfix file stays behind. Double-clicking it launches BandiFix, which uses it to repair the MP4.

Where is BandiFix?

BandiFix (bdfix.exe) is installed with Bandicam, usually in C:\Program Files\Bandicam or C:\Program Files (x86)\Bandicam. Open it, click Open and choose the broken AVI or MP4 recording.

Why does BandiFix not repair my MP4?

BandiFix relies on Bandicam's own index data. Without the .bfix file, with write caching enabled, or with certain Bandicam versions that had known repair bugs, it may fail. An index rebuild from a short reference recording is the next option.

How can I stop Bandicam recordings from getting corrupted?

Keep Bandicam and graphics drivers updated, stop recordings with the hotkey before closing games, avoid recording to nearly full or external drives, and consider AVI with a CPU H.264 encoder if corruption happens often on your hardware, as Bandicam suggests.

Have a broken recording right now?

Diagnose it and hear or watch a free repaired preview. Nothing is uploaded.

Open the repair tool
  • Bandicam
  • BandiFix
  • screen recording
  • game capture
  • MP4