Android screen recording corrupted, missing or silent? How to fix it
By the FixMP4 engineering team · · 8 min read
Android's built-in screen recorder saves an MP4 file when you tap stop. If recording ends any other way (the phone runs out of space, the battery dies, the system kills the recorder or the phone restarts), the file is left unfinished and may refuse to play, show 0 seconds, or disappear from the gallery. Separately, many people find their recording plays but is silent, which is a different issue entirely. This guide covers where recordings are stored, why they break, how to tell a blocked recording from a corrupted one, and how to recover a file that will not open.
Where your recording should be
Screen recordings are ordinary video files, usually H.264 video with AAC audio in an MP4 container. Their location depends on the phone:
- Pixel and stock Android: the Movies folder in internal storage.
- Samsung: DCIM, in a Screen recordings folder.
- Other brands: a folder under DCIM, Movies or Pictures named after screen recording.
If the gallery does not show a recording you expected, open the folder with the Files app, or connect the phone to a computer and browse there. Gallery apps hide files they cannot read, so an unfinished recording may be on the phone even though it is invisible in the gallery.
Why screen recordings break
- Storage full. Screen recordings grow quickly, especially at high resolution, and the recorder stops when space runs out.
- Battery saver or aggressive app management. Some phones stop background services to save power, and the recorder can be one of them during long sessions.
- Phone restart or crash. A system update, overheating or a frozen app can restart the phone mid-recording.
- Games and heavy apps. Recording a demanding game adds load and heat, and the phone may throttle or end the recording.
- Third-party recorder crashes. Apps from the Play Store use the same system recording interface but have their own failure modes.
Silent recordings are not corrupted
If the video plays but has no sound, check the recorder's sound setting before anything else. Built-in recorders typically offer no sound, media sounds, microphone, or media plus microphone. Even with media sounds selected, many apps block internal audio capture to protect copyrighted content or privacy: streaming services, some games and calling apps among them. The recording is fine; the audio simply was never captured, and no tool can add it later.
Similarly, protected content such as some streaming apps appears as a black screen in recordings. That is deliberate and cannot be fixed afterwards.
Step 1: get the file onto a computer
Repair is easier and safer on a computer:
- Connect the phone with a USB cable and choose File transfer on the phone.
- Copy the broken recording to the computer. Do not move it; copy it, so the original stays on the phone.
- Record a new screen recording on the same phone for ten to fifteen seconds, with the same resolution and sound settings, and copy that too.
If the broken file does not show up over USB, it may still be present but hidden by the media index. Restarting the phone usually refreshes what the computer sees. A file manager app on the phone can also show it.
Step 2: check what you have
Open the broken file in VLC on the computer. The results tell you what to do next:
- It plays fully in VLC: the file is healthy and the phone's gallery is being picky. Use VLC, or re-save it with a converter.
- It plays partly: a section of data is damaged, but most of it is recoverable.
- It does not open, or shows 00:00: the index is missing, which is the typical result of an interrupted recording. The article MP4 file shows 0 seconds explains why.
- The file is 0 bytes: no data was written, so there is nothing to recover. See MP4 file is 0 bytes for the few exceptions.
Step 3: rebuild the recording
An interrupted screen recording usually has every frame up to the moment it stopped. Rebuilding its index brings it back:
- Open the FixMP4 repair tool in a browser on your computer.
- Add the broken recording, then the fresh test recording as the reference.
- Check the free preview. If your screen is visible and the sound is right, export the repaired MP4.
The work happens entirely in your browser. Screen recordings often show messages, account details and notifications, so not sending them to an online service is a real advantage. The reference matters because it tells the tool how this phone's encoder configured the video; our guide to choosing a reference file explains which settings must match.
Recordings with a variable frame rate
Screen recorders capture fewer frames when the screen is static and more when it is moving. After a rebuild, timing comes from the reference, so a repaired recording with long static stretches can play at slightly different speed in places. Audio stays accurate. If sound and picture drift apart, the guide to fixing audio out of sync has ways to correct it.
Prevent broken screen recordings
- Free up space before long recordings; keep several gigabytes spare.
- Exclude the recorder from battery optimisation in the phone's app settings.
- Record at a lower resolution for long sessions; it reduces size and heat.
- Stop recording from the notification, not by turning off the screen or restarting.
- Split long sessions into shorter recordings.
For other Android video problems, see Can't play this video on Android and the Android video repair guide.
On iPhone, see screen recording failed to save due to -5823.
Frequently asked questions
Where does Android save screen recordings?
It depends on the phone. Pixel and many stock Android phones save to the Movies folder, Samsung phones to DCIM/Screen recordings, and other brands to similar folders. They also appear in the Gallery or Photos app. If one is missing there, check the folder with a file manager or from a computer.
Why did my screen recording save with no sound?
Many apps block internal audio capture, especially streaming, banking and some communication apps, so the recording is silent by design. Also check the sound source setting of the recorder: media sounds, microphone, or both. A silent file is not a corrupted file.
Why is my screen recording 0 seconds or unplayable?
The recorder stopped before it could finish the file, typically because the phone ran out of storage or battery, the recorder was killed by a battery optimisation, or the phone restarted. The frames are often still in the file, but the index players need is missing.
Can I repair an Android screen recording on my computer?
Yes. Copy the broken file and a short healthy screen recording from the same phone to a computer, then rebuild the broken one with FixMP4 using the healthy file as the reference. The repair runs in the browser, so the recording is not uploaded.
Have a broken recording right now?
Diagnose it and hear or watch a free repaired preview. Nothing is uploaded.
Open the repair tool