Panasonic Lumix video corrupted? Recover MDT, MOV and MP4 clips

By the FixMP4 engineering team · · 7 min read

When a Panasonic Lumix stops recording unexpectedly, the clip usually is not lost: the frames are on the card, but the camera never finished writing the file. Depending on the model, you find either a normal-looking MOV or MP4 that will not play, or a file with the unusual extension .MDT. Panasonic offers its own repair utility for some of these cases, and the rest can often be rebuilt with an index-repair tool. This guide explains which route fits your clip.

Why Lumix clips break

Like nearly every camera, a Lumix writes compressed frames to the card as you record and writes the index (the moov atom) when you press stop. If recording ends any other way, the index is missing:

  • the battery ran flat or was removed while recording;
  • the card was ejected, failed or filled up mid-take;
  • the camera froze or overheated during long 4K or 6K recordings;
  • an external power or USB-C supply dropped out on a rig.

Our explainer on the moov atom shows why a file without it is unplayable even though the footage is there.

First steps (before any software)

  1. Stop using the card. Do not record more, and decline any prompt to format or "restore" it.
  2. Copy the whole card to a computer with a card reader, including hidden and unusual files. Work only on copies.
  3. Note the recording settings of the lost clip: file format (MOV or MP4), resolution, frame rate, bit depth, codec (H.264 or HEVC), and the audio format (AAC or LPCM). The Lumix menu shows these under the video quality settings.

Route 1: Panasonic's LUMIX Repair Tool (.MDT files)

Recent full-frame S-series bodies leave an .MDT file when a recording is not saved properly. Panasonic publishes a free Windows utility, the LUMIX Repair Tool, for these files. Per Panasonic's support page, it:

  • works on .mdt files only;
  • supports MOV or MP4 with LPCM audio;
  • does not support MP4 with AAC audio or AVCHD;
  • needs a correctly saved clip of about one second from the same camera with the same format and quality;
  • needs free disk space of about three times the file size;
  • produces a file that plays on a computer but not back in the camera, and loses the original recording time metadata.

If your clip matches (an S-series .MDT recorded with LPCM audio), try the official tool first. It knows the camera's own layout.

Route 2: rebuild the index with FixMP4 (MP4 and MOV, AAC audio)

Lumix models outside that list, and clips recorded as MP4 with AAC audio, are exactly the cases the official tool excludes. Many G-series and compact Lumix cameras record MP4 with AAC, as do S-series bodies in their MP4 modes. For these, an index rebuild works the same way as for other cameras:

  1. Make a reference clip: record five to ten seconds on the same camera with identical settings (same format, resolution, frame rate, codec and audio). Anything in front of the lens will do.
  2. If you have an .MDT file, copy it and rename the copy to the format the camera was set to (.mp4 or .mov) so file pickers accept it. The contents do not change.
  3. Open the FixMP4 repair tool, select the broken file and the reference, and wait for the scan. Everything runs in your browser; 4K files are read straight from your disk and never uploaded.
  4. Watch the free preview. Smooth motion and correct colours mean the settings matched. Green or grey blocks mean a mismatch, most often a different bit depth (8-bit vs 10-bit) or codec; record a new reference.
  5. Export when you are happy with the preview.

Limits to know: FixMP4 rebuilds H.264 and HEVC video with AAC audio. Linear PCM audio is not rebuilt, so an LPCM clip may come back with picture only; that is when the official tool is the better choice if your model is supported. ProRes RAW and other RAW video outputs are not supported.

Clips that will not appear at all

If the card shows no file for the take, or the camera reports a card error:

Long recordings and file splitting

On FAT32-formatted cards, Lumix cameras split long recordings into several files. If the battery died during a later part, only the last file is broken; the earlier parts play normally. They also make perfect references, because they come from the same take with the same settings.

Preventing it next time

  • Use fresh, fully charged batteries for long takes, or a stable external power source with a dummy battery.
  • Keep the camera ventilated for long 4K/6K recordings and enable the temperature settings your model offers.
  • Format cards in the camera, not on a computer, and replace cards that ever report errors.
  • For critical recordings, record to two cards (relay or backup mode on dual-slot bodies) or to an external recorder.

More general advice is in our checklist for preventing corrupted recordings.

Summary

  • Copy the card first; never format before recovering.
  • S-series .MDT with LPCM audio: try Panasonic's LUMIX Repair Tool.
  • MP4 or MOV with AAC audio, or models the tool does not cover: rebuild the index with a matching reference in the repair tool and check the free preview.
  • Missing files: recover from a card image, then repair. See also repair a MOV file.

Frequently asked questions

What is an .MDT file on a Lumix card?

It is the unfinished data of a recording that was not saved correctly, for example because the battery died. The camera did not get to finalise it into a normal MOV or MP4.

Which Lumix files can the official LUMIX Repair Tool fix?

According to Panasonic, .mdt files from supported S-series models recorded as MOV or MP4 with LPCM audio. MP4 with AAC audio and AVCHD are not supported by that tool.

Can FixMP4 repair a Lumix MP4 with AAC audio?

Yes, if the video is H.264 or HEVC: it rebuilds the index from a reference clip recorded with the same settings. Linear PCM audio is not rebuilt, so LPCM clips may come back without sound.

Should I let the camera repair the card?

Not before you have copied everything to a computer. Formatting or in-camera repair prompts can overwrite the data you are trying to save.

Have a broken recording right now?

Diagnose it and hear or watch a free repaired preview. Nothing is uploaded.

Open the repair tool
  • Panasonic
  • Lumix
  • MDT file
  • GH6
  • S5