Error 0xc00d36e5 "Item is unplayable": what it means and how to fix it
By the FixMP4 engineering team · · 8 min read
Error 0xc00d36e5 is Windows' way of saying "I could not read this item". You will see it in the Media Player app, the older Windows Media Player, Movies & TV, Photos, and sometimes in editors that rely on the same Media Foundation framework. The message usually reads "Can't play" or "Item is unplayable. Please reinsert the media and try again". It does not tell you why the read failed, so the fix depends on finding out which of four very different causes you are dealing with.
This guide walks through a short diagnosis first, then gives the fix for each outcome.
The two-minute diagnosis
Before changing any setting, run these two checks. Together they split almost every case in two.
- Copy the file to your desktop. Do not play it from the SD card, phone or USB drive. Drag it to a folder on the internal disk and wait for the copy to finish. If Windows reports an error during the copy, stop here: the storage is the problem, and the section on drives below applies.
- Open the copy in VLC. VLC uses its own decoders, so it does not care whether a Windows codec extension is installed.
| What you see | What it means |
|---|---|
| Copy plays in the Windows player now | The external drive, cable or card reader was failing mid-read |
| Copy fails in Windows, plays in VLC | Missing codec or unsupported container in Windows |
| Copy fails everywhere, no duration shown | The file's index is missing or damaged |
| Copy plays but stops early or glitches | Part of the media data is damaged |
Cause 1: a drive that returns read errors
The phrase "please reinsert the media" in the message is a clue. Windows raises 0xc00d36e5 when the read itself fails, which is common with:
- USB hubs and front-panel ports that do not supply stable power to a portable hard drive;
- worn USB cables, especially the short ones that come with older external drives;
- cheap card readers, and SD cards that are starting to fail;
- phones connected over MTP, where Windows streams the file from the phone instead of reading a normal disk.
Plug the drive straight into a port on the back of the computer, try another cable, and copy the files off before you play them. For phones, import through the Photos app or copy the DCIM folder to the PC rather than double-clicking videos inside the phone's folder. If the card or drive throws errors during the copy, see our guide to recovering videos from an SD card before you run any repair, because a failing card should be imaged first.
Cause 2: a format Windows does not decode
If VLC plays the file and Windows does not, the file is healthy. Windows simply lacks a decoder for what is inside the container. Check the codec in VLC under Tools, Codec Information. The usual suspects:
- HEVC (H.265) from iPhones, recent Android phones, drones and mirrorless cameras. Windows needs the HEVC Video Extensions from the Microsoft Store. Some PCs ship with it, many do not.
- ProRes from iPhone Pro models and professional cameras. Windows' built-in players do not decode it at all.
- PCM or AC-3 audio in a MOV or MP4. The picture may decode while the audio fails, and some builds of the player refuse the whole file.
Your options are to install the missing extension, keep using VLC for those files, or convert them to H.264 with AAC audio. Our guide to playing MOV files on Windows covers each route, and converting MOV to MP4 explains when a lossless remux is enough and when you need to re-encode.
Avoid installing large third-party codec packs to fix a single file. They replace system components and are a common cause of new playback errors later.
Cause 3: the player itself is in a bad state
Occasionally only one app fails while other Media Foundation apps open the same file. That points to the app rather than the file. Go to the app's entry in the Windows settings list of installed apps and use the Repair button under its advanced options; the Reset button next to it is the stronger version and also wipes the app's library. Then install pending Windows updates, since codec extensions update through the Store and an outdated HEVC extension can fail on newer encoder output.
For the classic Windows Media Player, a quick test is to drag the file onto the window rather than adding it to the library. Library corruption can make individual items report as unplayable even though they open fine directly.
Cause 4: a damaged or incomplete file
When the internal copy fails in every player, VLC shows a duration of 00:00 or nothing at all, and the file size looks normal, the most likely explanation is a missing or broken MP4 index. MP4 and MOV recordings keep a table of every frame, called the moov atom, which is written when recording stops. If the camera's battery died, the phone crashed, the card was pulled, or an export was interrupted, that table never gets written. The video data is still inside the file, but no player can find it. Our explainer on what the moov atom is shows why this single structure matters so much.
To repair it:
- Keep the original untouched and work on a copy.
- Record a short clip with the same device and the same settings (resolution, frame rate, HEVC or H.264). This is the reference file.
- Load both files into the FixMP4 repair tool. It reads the raw frames of the damaged recording and writes a fresh frame table for them, entirely on your own computer.
- Watch the free preview to confirm your footage is back before deciding whether to save the full result.
If you are unsure whether the file is damaged at all, the MP4 file checker reports whether the index exists and whether the data runs to the end of the file.
When the file plays but stops early or shows blocks, the index may be fine while part of the media data is gone. That is a different problem, explained in video freezes halfway through.
Premiere Pro, DaVinci Resolve and editor exports
Editors that import through Windows' decoders can show 0xc00d36e5 on files that came out of a failed export. If an export crashed or the disk filled up near the end, the output is often missing its index exactly as an interrupted camera recording would be. Re-exporting is the fastest fix when the project still exists. When it does not, treat the export like any other truncated recording, using an earlier successful export from the same preset as the reference. See Premiere export corrupted for preset-specific tips.
Related Windows errors
0xc00d36e5 has several close relatives that point to different problems:
- 0xc00d36c4 means the format or container is unsupported.
- 0xc00d36b4 is usually an audio or video format the app will not handle.
- 0xc1010103 tends to appear with broken or unusual MP4 headers.
- 0xc00d3e8c is a decoder failing partway through the stream.
If you are still stuck, run the two-minute diagnosis again on a second file from the same device. One bad file suggests that recording was interrupted; every file failing points to the drive, the codec or the app.
Frequently asked questions
What does error 0xc00d36e5 mean?
It is a Windows Media Foundation error that appears when the built-in player cannot read the item you asked it to open. The usual triggers are a file on a flaky external drive, a container or codec the player does not handle, or a file whose structure is damaged or incomplete.
Is my video corrupted if I see 0xc00d36e5?
Not necessarily. Copy the file to your internal drive and open it in VLC. If it plays there, the file is fine and the problem is the Windows player or the drive connection. If it also fails in VLC and shows no duration, the file itself is probably damaged.
Why does 0xc00d36e5 happen mostly with MOV files from an external drive?
MOV files from iPhones and cameras are often HEVC, which Windows only decodes with an extra extension, and external drives connected through hubs or worn cables can return read errors mid-file. Both problems end in the same generic error, which is why the copy-to-internal-disk test is the first step.
Can FixMP4 repair a file that gives 0xc00d36e5?
If the file is an MP4, MOV or M4A whose index is missing or broken, yes. FixMP4 rebuilds the index in your browser using a healthy reference clip from the same device and shows a free preview before you pay.
Have a broken recording right now?
Diagnose it and hear or watch a free repaired preview. Nothing is uploaded.
Open the repair tool