DaVinci Resolve shows Media Offline for an MP4? Causes and fixes
By the FixMP4 engineering team · · 8 min read
In DaVinci Resolve, the red "Media Offline" frame means one of two very different things: Resolve cannot find the file, or it found the file and cannot decode it. Most tutorials only cover the first case (relinking), which is why so many people relink a clip that was never missing and still see red. This guide separates the cases, covers the codec limits of the free version, and explains what to do when the MP4 itself is broken.
First: is the file missing or undecodable?
On the Media page, select the clip and open the Metadata panel. Then check:
- The clip shows a red chain or "offline" in the Media Pool and the file path no longer exists: the media was moved, renamed or is on a drive that is not connected. This is a true offline clip.
- The path exists, the file plays in VLC, but Resolve shows red: Resolve cannot decode it. This is a codec problem.
- The file does not play anywhere: it is damaged, typically an interrupted recording.
- Audio plays, picture is red: the video stream specifically is unsupported.
Case 1: relink moved media
- In the Media Pool, select the offline clips.
- Right-click and choose "Relink Selected Clips" (or use the chain icon at the top of the Media Pool).
- Point Resolve to the folder that now contains the files. It matches by name and timecode.
Reconnect external drives before opening the project, and keep the same drive letter on Windows; Resolve stores absolute paths.
Case 2: codecs the free version cannot decode
DaVinci Resolve (free) and Resolve Studio share the same editor, but Studio adds decoders and hardware acceleration. Common red-frame triggers on the free version:
| Footage | Typical source | Free version |
|---|---|---|
| HEVC 8-bit 4:2:0 | iPhone, Android, GoPro, DJI | macOS: works. Windows: needs the HEVC extension, CPU decoding only |
| HEVC 10-bit 4:2:2 | Canon R-series, Sony, Panasonic in high-end modes | Often unsupported; Studio needed or transcode |
| H.264 10-bit / 4:2:2 | Sony XAVC S-I, Panasonic All-I, Fujifilm | Unsupported on Windows/Linux free |
| AV1 | NVIDIA/AMD screen recordings | Depends on version and GPU |
| AAC audio | Almost everything | Not supported in the free version on Linux |
Fixes, from cheapest to most robust:
- Windows: install the HEVC Video Extensions from the Microsoft Store and restart Resolve. That solves many 8-bit HEVC clips.
- Record differently next time: on phones choose "Most Compatible" (H.264); on cameras pick 8-bit 4:2:0 modes for projects edited on the free version.
- Transcode to an editing codec. Free tools like Shutter Encoder or HandBrake can produce DNxHR HQ or ProRes 422 with a constant frame rate. Files get larger, but Resolve plays them smoothly.
- Buy Studio if you work with 10-bit 4:2:2 footage regularly.
Case 3: variable frame rate recordings
Phones, OBS (some settings), Xbox Game Bar, Zoom and Teams often record variable frame rate (VFR): frame durations change with load or motion. Resolve expects constant frame rate. Symptoms range from audio drifting out of sync to clips that go offline part way through the timeline. MediaInfo shows "Frame rate mode: Variable" for these files.
Convert to constant frame rate before importing. In Shutter Encoder enable "Conform" or the constant-frame-rate option; in HandBrake select "Constant Framerate" with the matching rate. Our article on audio drifting out of sync has more detail on why VFR breaks editors.
Case 4: the MP4 itself is damaged
When the clip will not play in VLC either, or plays for a few seconds and stops, Resolve is not the problem. Typical histories:
- the camera battery died during the take;
- OBS or another recorder crashed (our OBS crash guide covers this);
- a render from Resolve or another editor was cancelled or ran out of disk space;
- a copy from the card was interrupted.
Run the free MP4 file checker on the clip. If it reports that the media data is present but the moov atom (the index) is missing or incomplete, the frames can be rebuilt. Use the FixMP4 repair tool: pick the broken file and a short healthy clip recorded on the same camera with the same settings, check the free preview, then export a playable MP4 or MOV and import that into Resolve. Everything happens in your browser, so large camera files never leave your disk.
For renders that failed, it is usually faster to render again; the project and media are intact. The Premiere and editor export guide explains when rebuilding a failed render makes sense.
Note the limits: FixMP4 rebuilds H.264 and HEVC video with AAC audio. Linear PCM camera audio is not rebuilt, so some cinema-camera clips come back with picture only, and ProRes or BRAW recordings are not supported.
A quick workflow for phone and screen footage
If most of your material comes from phones, game capture or video calls, a simple routine avoids nearly all red frames on the free version:
- Copy the footage to a fast local drive.
- Run MediaInfo on one clip of each source to confirm codec, bit depth and frame rate mode.
- Convert anything HEVC, 10-bit, 4:2:2 or variable frame rate to DNxHR HQ at a constant frame rate in one batch.
- Import the converted files, keep the originals as backup.
It costs disk space but saves hours of troubleshooting, and the edit plays smoothly even on modest hardware.
Other causes worth ruling out
- Optimized media or proxy cache pointing to deleted files: Playback menu, Delete Render Cache, and regenerate.
- Files over 4 GB on FAT32 drives that were split by the camera: import the whole clip folder so Resolve can join spanned clips, or join them first.
- GPU memory exhaustion on 4K or 8K timelines can produce red frames intermittently. Lower the timeline resolution or use proxies.
Summary
- Red frame plus missing file: relink.
- File exists and plays elsewhere: codec or VFR. Install the HEVC extension on Windows, transcode to an editing codec at constant frame rate, or use Studio.
- File plays nowhere: it is damaged. Check it, then rebuild the index with a reference in the repair tool before importing.
Frequently asked questions
Why does DaVinci Resolve say Media Offline when the file is still there?
Resolve shows the same red frame when it cannot decode a clip. On the free version this usually means HEVC, 10-bit H.264 or 4:2:2 footage it has no decoder for, not a missing file.
Does the free version of DaVinci Resolve support HEVC?
On macOS yes. On Windows the free version relies on Windows' HEVC extension and has no GPU decoding; many 10-bit and 4:2:2 HEVC files need Resolve Studio or a transcode.
Why do I hear audio but see Media Offline?
The audio decoded but the video did not. That points at the video codec or profile, not at a missing file. Check the clip's metadata on the Media page.
Should I transcode phone footage before editing in Resolve?
It often helps. Converting variable frame rate phone or game recordings to a constant frame rate, edit-friendly codec such as DNxHR or ProRes avoids sync drift and decoding errors.
Have a broken recording right now?
Diagnose it and hear or watch a free repaired preview. Nothing is uploaded.
Open the repair tool