Wyze SD card video won't play? Fix playback in the app and on a PC

By the FixMP4 engineering team · · 8 min read

Wyze cameras with a microSD card record locally, and when that footage will not play, the problem is usually one of three things: the stream from the camera to the app, the card itself, or a clip that was cut off when the camera lost power. Because the card can be read on a computer, you have more options than with cloud-only cameras: if the app will not show a recording, the file may still be on the card and playable elsewhere. This guide explains how to check each layer and how to recover clips that are damaged.

How Wyze stores recordings on the card

Wyze cameras offer continuous recording or event-based recording to the card, depending on the model and your settings. The camera writes footage as a series of short video files in folders organised by date and hour, so a day of continuous recording turns into many small clips rather than one huge file. Event recordings may be stored in their own folder. Folder layouts can differ between models and firmware versions, but the date-based structure makes it easy to find a particular moment.

Two consequences matter for troubleshooting:

  • A power cut or crash damages at most the clip being written at that moment.
  • If the app cannot show a time range, the files for it may still be sitting on the card.

Problem 1: playback in the app fails or loads forever

The app does not download clips from the cloud for SD playback; it streams them from the camera. So the path is camera, your Wi-Fi, your router, the internet (when away), and the phone.

  • Test on the same Wi-Fi as the camera. If it works at home and not away, the upstream connection or the remote path is the bottleneck.
  • Check the camera's signal. Cameras far from the router or behind thick walls stall during playback even when the live view sometimes works. Moving the router or adding a mesh node helps more than any setting.
  • Restart the camera by unplugging it for a few seconds, then try again.
  • Update the app and the camera firmware. SD playback problems are often fixed in updates.
  • Pick a lower playback quality if the app offers it.

Problem 2: the timeline is empty or the card is not detected

  • In the camera's settings, open the local storage section and check the card status. A card reported as missing, full or needing formatting explains an empty timeline.
  • Make sure recording to the card is enabled, and check whether it is set to continuous or events only. An events-only setting records nothing when there is no motion.
  • Use a card size and type the camera supports (Wyze lists supported capacities per model) and a reputable brand. Counterfeit cards report a large capacity but lose data once their real capacity is exceeded; our guide to fake SD cards shows how to test one.
  • If the card has been running for a long time in continuous mode, it may be wearing out. Constant writing is hard on cards; high-endurance cards are designed for it.

Problem 3: you need the files on a computer

Reading the card directly is the most reliable way to get footage out, especially for an incident you need to keep.

  1. Unplug the camera before removing the card, so it is not writing at that moment.
  2. Insert the card into a card reader on a computer. Do not accept any prompt to format it.
  3. Copy the whole recording folder to the computer, then put the card back.
  4. Browse to the date and hour you need and open the clips in VLC.

If the computer cannot read the card at all, or asks to format it, the file system is damaged. Do not format. Follow the steps in recovering videos from an SD card, which uses free tools that scan the card without writing to it.

Problem 4: one clip will not play anywhere

A single clip that VLC cannot open, while those before and after it play, usually belongs to a moment when the camera lost power, rebooted, or had a firmware hiccup. The clip contains the frames recorded up to that point, but the camera did not finish writing it, so its index is missing.

To recover it:

  1. Copy the broken clip and one healthy clip from the same camera (ideally from the same hour, so the resolution and settings match) to your computer.
  2. Open the FixMP4 repair tool and load the broken clip, then add the healthy clip as the reference.
  3. Check the free preview. If you can see the footage, export the repaired file.

The repair runs in your browser, so security footage of your home is not uploaded to any server. It works with MP4 and MOV files that use H.264 or HEVC video, with AAC audio if the clip has sound. If your model stores audio or video in a format outside that list, the tool says so during the free check rather than after you pay.

Keep your footage safe

  • Copy important clips off the card promptly. Continuous recording overwrites the oldest footage when the card fills up.
  • Use a small UPS or a power bank that supports pass-through charging for cameras that must keep recording during brief power cuts.
  • Replace cards every so often in continuous mode, and immediately if they start producing errors.
  • Check the card status in the app from time to time; a card that silently stopped recording is only noticed when you need footage.

For other security and car cameras, see our guides to CCTV and DVR footage and dashcam footage that won't play.

Cloud doorbells work differently from SD card cameras; see Ring video won't play or download.

Frequently asked questions

Can I watch Wyze SD card recordings on a computer?

Yes. Power off or unplug the camera, remove the card and read it with a card reader. The recordings are ordinary video files arranged in date and time folders, and most of them play in VLC.

Why does SD card playback in the Wyze app keep loading?

Playback streams the clip from the camera over your network. A weak Wi-Fi signal to the camera, a busy upload link when you are away from home, or an app or firmware problem can stall it. Watching from the same network as the camera is the quickest test.

Why are the last few minutes before a power cut missing or broken?

The camera writes each clip as it records. When power drops, the clip being written is not closed properly and can be unplayable or missing. Earlier clips are usually unaffected.

Should I format the card in the camera or on a PC?

Format in the camera through the app where possible, so the camera sets up the card the way it expects. Copy anything you want to keep to a computer before formatting, because formatting erases the recordings.

Have a broken recording right now?

Diagnose it and hear or watch a free repaired preview. Nothing is uploaded.

Open the repair tool
  • Wyze
  • security cameras
  • SD cards
  • MP4
  • CCTV